The scroll mode allows you to view the indoor thermometer/hygrometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.
Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).
The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.
Indoor/Outdoor temperature & humidity
Outdoor temperature range: lithium batteries: -40°F to 140°F
Outdoor temperature range: non-lithium batteries: -4°F to 140°F
Indoor/Outdoor Humidity range 10% to 99%
Rate of change indicators
Scroll mode automatically displays each sensor every 5 seconds
Dip switch selectable remote channels
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature & humidity
Monitors temperature and humidity in up to 8 remote locations
Includes three remote sensors (F007TH) – transmission range of up to 300 feet line of sight (100 feet under most conditions)
Frequency: 433 MHz
Update Rate: 60 seconds
Console Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50″
Main Unit – 4 x AAA (not included)
Remote Sensor – 2 x AAA (not included)
Make sure this fits by entering your model number.
Simple to read, simple to use, and affordable, the WS-10 includes an indoor thermo-hygrometer and three remote thermometer/hygrometer sensors (F007TH), which can be read at the same time.
The display console can remotely read and update up to eight remote thermo-hygrometer sensors at the same.
The console includes audible and visual alarms when temperature and humidity exceed your pre-set minimum and maximum alarm settings.
The WS-10 includes three remote thermometer/hygrometers and five additional sensors can be added (F007TH, F007TP, F007T, F007PF) for comprehensive monitoring.
The console displays temperature and humidity, minimum and maximum temperature and humidity, which can be manually reset.