Condition: Brand New
Color: Shown as Picture
Module model: ESP32-CAM
Flash: 32Mbit by default
RAM: Internal 520KB + External 4 M P
Bluetooth: Bluetooth 4.2BR/EDR and BLE standards
Support interface: UART, I2C, PWM
Support TF Card Maximum Support: 4G
IO port: 9
Serial Port Rate: default 115200bps
Image Output Format JPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range: 2412~2484MHz
Antenna Form: onboard antenna, gain 2dBi
Transmit Power: 802.11b: 17±2dBm (@11IMbps)
802.11g: 14±2dBm (@54Mbps)
802.11n: 13±2dBm (@mcs7)
CCK, I Mbps: -90dBm
CCK, 11 Mbps: -85dBm
6Mbps (l/2bpsk): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72. 2 Mbps): -67dBm
Turn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep–sleep: the lowest power consumption can reach 6mA@5V
Moderm-sleep: up to 20ma@5V
Light-sleep: up to 6.7mA@5V
Power Supply: 5 V
Working Temperature: -20 ° C ~ 85 ° C
Storage Environment: -40°C-90°C,
1 * Camera Module
Make sure this fits by entering your model number.
Using a on-board antenna, the module developed based on the ESP32 chip can work independently as a minimum system.
(BLE Beacom), with two high-performance 32-bit LX6 CPUs, a 7-stage pipeline architecture with a frequency range of 80MHz to 240MHz.
Totally compliant with WIFI 802.11b/g/n/e/i and Bluetooth 4.2 standards.
Can build a separate network controller, or can be installed on other host MCUs to add networking capabilities to existing devices.
ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, QR wireless identification, industrial wireless control, etc.